| Uplink Ports |
2 Uplink Port, 1000Mbps RJ45 ports & 2 Gigabit SFP ports |
| Switch Capacity |
40Gbps Full duplex |
| Packet Forwarding Rate |
29.76Mpps |
| Port |
20 |
| PoE Ports |
16, 10/100/1000Mbps; RJ45 ports; Max. 30W Output of Single PoE Port |
| Transmission Distance |
0-100m/1000Mbps or Port 9-16 Max. 250m/10Mbps via Cat.5e or more under Extend mode |
| MAC Address List |
8K |
| PoE Feature |
All ports support MDI/MDIX |
| PoE Standard |
IEEE802.3af, IEEE802.3at |
| Packet Buffer |
3Mb |
| Watchdog |
Support |
| Surge Protection |
Common mode/RJ45 port: 4KV Differential mode/RJ45 port: 2KV Common mode/Power board: 4KV Differential mode/Power board: 2KV |
| ESD Protection |
Air discharge: 8KV, Contact discharge: 6KV |
| PWR (Power Indicator) |
Light on: Powering Light off: No Power |
| Operating Mode |
Light off: Normal mode |
| 1-20 Indicator (Link & Data) |
Green light off: Link is disconnected, Green light on: Link is connected, Green light flash: Data Transmitting |
| 1-16 Indicator (PoE) |
Yellow light off: PoE not powering, Yellow light on: PoE powering |
| PoE Max Indicator |
Light off: Indicates PoE power usage is less than 90%, Light flash: Indicates PoE power usage 90%≤P≤95%, Light on: Indicates PoE power usage 95%<P<100% |
| PoE Led Button |
It is used to switch whether the 1-16 indicator lights indicate the Link/Data status or the PoE status; Default indicates Link/Data status |
| Extend Switch |
OFF: All ports can communicate with each other, the transmission rate is 10/100/1000Mbps adaptive, and the watchdog function is turned, off; ON: 9-16 ports can extend the transmission distance of the network cable to Max. 250 meters, the transmission rate becomes 10Mbps, and the watchdog function is turned on; |
| Network protocol and Standard |
IEEE802.3/802.3u/802.3ab/802.3z/802.3x |
| Forwarding Mode |
Store-and-forward |
| Operating Temperature |
-10°C-50°C |
| Operating Humidity |
10%-95% , non-condensing |
| Storage Temperature |
-40°C-70°C |
| PoE Power Supply |
1/2(+),3/6(-) |
| PoE Power Budget |
200W |
| Power Source |
Bult-in Power Supply, Input: 110-240V AC, 50/60Hz |
| Power Consumption |
<5W |
| Dimension |
320mm x207mm x 44mm |
| Weight |
1.78kg |
Reviews
There are no reviews yet.